Hi , 

can someone offer some advise please 

i have been converting an iveco daily MWB 35S12 out over past few months into a motocross camper /day van 

it was already ply lined out ,what i have done is removed this , added rockwool inulation to the sides from B&Q then screwed ply back in position 

i also added two bonded windows to the front half the van cutting the ply out for this part 

i then used a caravan insulation from the roof and bonded it to the iveco (polystyren ) then adding more ply to the roof 

i have left this now for about 2 months over the xmas period , went in van yesterday to find it was heavily condensated and dripping down the sides 

its got two roof vents the spining workie van type and has the oem side vents at the rear 

i was about to start the wiring before carpeting but thought to myself if i carpet it out it would go damp and mouldy !!

any help appreciated 

on a side note was about to order some lights to wire up been considering the labcraft lm16 for some 12v lighting  any good ?